HPV Decontamination Transfer Hatch – Integrated Generator
  Rapid, Safe and Reliable

(waiting for new content for this product ......).

Loading of H202 on chamber
Rapid Decontamination Cycles from 35 minutes
Solid Core Inflatable Seal Doors
Integrated Generator

The material fumigation hatch has an integrated generator and provides a rapid hydrogen peroxide vapor material decontamination cycle, from 35 minutes in total for a validated 6Log kill. 

The hatches come with a cart system option that allows the goods to be transferred quickly and safely through the hatch.  This also provides a consistent load presentation in the hatch, to assist in repeatable fumigation cycles.  Racking systems are also available where the cart system is not required.

With over 50 HPV fumigation chambers in active use, PBSC and Bioquell provide a highly reliable system which will provide long lasting results over many years, which has been proven in the field and material compatibility testing is available to provide proof of efficacy before committing to the hydrogen peroxide material decontamination chamber.

The material fumigation hatches are constructed in stainless steel with a dedicated Siemens© PLC, Siemens© colour touch screen, internal aeration unit, air purge boost system with monitored air tight dampers and two high performance inflatable seal doors.  The fumigation hatch PLC monitors all the critical parameters set up during commissioning to ensure a safe and effective cycle.

The doors are machined from solid high pressure laminate with no hollow core, these are easy to clean and have excellent chemical and abrasion resistance.  There is a large vision panel with true flush glazing to both sides with no fixable fixings to the door leaf.  There is an inflatable seal around the perimeter which retracts into the groove when deflated to protect the seal.

The hatch interfaces with a Bioquell integrated generator for a rapid HPV decontamination cycle.

The HPV fumigation hatch is fitted with the APB (Air Purge Boost) system which takes fresh air through the chamber which can then be ducted directly to atmosphere, providing quick reliable and safe cycles without any added strain to the HVAC system.  The exhaust can be taken into the HVAC extract system if required.

Used to bio-decontaminate materials entering or exiting controlled environments, where validated cycles are required.  These include goods entering a higher classification clean room in a pharmaceutical environment or goods exiting across the containment line in a BSL facility. 

The chamber can be installed into a preformed wall or into a cast concrete wall where it is forming part of the containment boundary.

Where you would like to be able to use the HPV generator for other equipment in addition to the cart-to-cart chamber, such as isolators or laminar flow cabinets, we have an alternative decontamination hatch to interface with a remote HPV generator. Please see the C2C data sheet for more information.

(need to replace to correct images here)

Contact PBSC

PBSC HPV Decontamination Transfer Hatch – Integrated Generator
Pass Thru Chamber, material transfers, bio-sterilization, bio-decontamination chamber, sterilization transfer chamber, high level disinfection cycle, validated 6 log reduction, Geobacillus stearothermphilus, low temperature sterilization.